Spring Street, Springwood

Spring Street, Springwood

When this property was built approx. 150 years ago the gulley behind the parapet coping stones had good flow but over time the building has settled causing the gulley to lose it’s flow. Consequently the rain water has got into the building under the laps on the lead. The mortar chase for the lead apron in front of the coping stones on the string course has also failed. This has led to damp problems around the windows at the front of the house so serious that the plaster has collapsed. We have stripped out the slates above the laps on the lead in the gulley in order to seal them completely. Next we re-fixed all the slates, replacing any that were broken or damaged. Then we removed the failed mortar from the lead chase & sealed it using polyurethane. Finally we applied a PVA wash to the front of the property & re-pointed the bonds between the Ashlar blocks.

 

20140125_103618 20140125_103707 20140125_103803 20140125_103807 20140125_103815 20140130_105810 20140130_105820 20140130_105825 20140130_105829 20140130_111726 20140130_111730 20140130_111745 20140130_113958 20140130_114008 20140130_114150 20140130_114443 20140130_114600 20140130_114606 20140130_114610 20140130_132333 20140130_132345 20140130_132403 20140130_145859 20140130_145904 20140130_145912 20140130_145920 20140130_151336 20140130_151344 20140130_151350 20140130_151809 20140130_151826 20140130_160454 20140130_160636 20140130_160644 20140130_160655

Pizza Hut, Huddersfield Town Centre

Pizza Hut, Huddersfield Town Centre

This downpipe was blocked solid due to the joint collars having an opening that was too small. Cast iron joints like this are now only manufactured with this smaller 45mm diameter at the sleeve which is too small & tend to get blocked easily at the off set bend. This is a prime example of the problems joint collars like this cause. We always use good condition reclaimed cast iron which has the correct aperture to allow unimpeded rain water flow.

 

20140123_122318 20140123_122333 20140123_122350       20140123_122406 20140123_122423 20140123_122445 20140123_122502 20140123_122520 20140123_122619 20140123_122808 20140123_130315 20140123_130322 20140123_130443 20140123_131021 20140123_131027 20140123_131107 20140123_140401 20140123_141607 20140123_141619 20140123_141638 20140123_14164720140127_132201 20140127_134254 20140127_135420 20140127_135426 20140127_135557

 

This is a length of iron pipe that was lodged inside the downpipes.

 

20140127_135525 20140127_141129

Wood Street, Longwood

Wood Street, Longwood

New EPDM rubber roof with trims. By removing the up stand at the leading edge above the window & giving the Sterling OSB boards a tilt then installing new fascias, soffits, gutters & drip edge we have eliminated the need for internal outlets in the roof deck. Outlets in a flat roof like this are usually the first place where the roof fails & can cause other problems such as getting blocked easily which can be difficult to unblock by their very nature or leaking inside the roof space.

 

20140121_132406 20140121_132438 20140121_133237 20140121_133351 20140121_152602 20140121_152613 20140121_152622 20140121_152628 20140121_152634 20140121_152648 20140121_152702 20140121_152722 20140121_152733 20140121_152750 20140121_152801 20140121_152842 20140121_152856 20140121_152908 20140121_152920 20140121_152939 20140121_15295220140120_125845 20140120_125921 20140120_125925 20140120_125929 20140120_125934 20140120_125941 20140120_150509 20140120_150516 20140120_153414 20140120_153421 20140120_153433 20140120_154943 20140120_15495020140117_102744 20140117_102906 20140117_102922 20140117_102931 20140117_102947 20140117_103007 20140117_125339 20140117_130324 20140117_154658 20140117_154732 20140117_154754 20140117_162622 20140117_163736 20140117_163805 20140117_163816

20140116_125407 20140116_125412 20140116_125421 20140116_125431 20140116_125439 20140116_125448 20140116_125500 20140116_125518 20140116_144228 20140116_144241 20140116_144247 20140116_144304