Re-sealing leaking cast iron gutter joints which have caused damp on the party wall. This is a 4 stage process. Firstly the gutter is cleared out & dried. Then a coat of primer is applied to ensure  adhesion. Then a polyurethane sealant is injected into the joint to allow for expansion & contraction from hot/cold temperatures. Lastly a top coat of glassfibre reinforced acrylic membrane is applied.

 

2013-04-20 14.18.47 2013-04-20 14.17.19 2013-04-20 14.19.53 2013-04-20 14.20.19 2013-04-20 14.38.06

Leave a Reply