Repairs to the bitumen under felt using breathable membrane pitched roof underlay, raking out & re-pointing the failed mortar on the lead valleys, repairs to the bitumen under felt at the garage roof abutment & sealing the lead chase using polyurethane.
Sealing the chase on the lead flashings and installation of UPVC verge cover.
Lifting & re-bedding the ridge tiles, Stripping out & re-fixing the loose/slipped tiles plus raking out & re-pointing the failed mortar on the verges.
Stripping out the concrete tiles to carry out repairs to holes in the bitumen under felt. Replacing & re-fixing the lead flashings & re-pointing the chase. Raking out & re-pointing of failed mortar on chimney stack. Rendering the rear side of the chimney stack & clearing the lead gulley. Installation of a new flaunch (cap) on the chimney stack.
Raking out the failed mortar in the lead chase, bonds between coping stones & exterior wall pointing. Sealing the lead chase & bonds between the coping stones using polyurethane & re-pointing the exterior wall.
Sealing the lead chase where the old mastic has failed using polyurethane.
Repairs to perished bitumen under felt using breathable membrane pitched roof underlay & gutter clearance.
Removal of Ivy from the gutter & eaves. Even though this ivy was removed from the exterior wall of this property it has grown back from inside the eaves causing roof damage which ultimately led to a bad leak in the bedroom. We always recommend that ivy is removed from any property because it causes no end of problems.
