Installation of new slates plus new angled concrete ridge tiles mechanically secured using dry ridge fixing system
2
New Roofshield vapour permeable breathable membrane pitched roof underlay and tanalised lath battens
Installation of new slates plus new angled concrete ridge tiles mechanically secured using dry ridge fixing system
2
New Roofshield vapour permeable breathable membrane pitched roof underlay and tanalised lath battens
Installation of new slates over the kickboard and black ash UPVC trims at the flat roof verges and drip edge
Installation of new timber verges and drip edge plus firestone EPDM rubber cap sheet on flat roof
Stripping off the concrete roof tiles and lath battens to carry out repairs to the perished bitumen under felt using vapour permeable breathable membrane pitched roof underlay
Conversion from tiled roof to seamless EPDM rubber membrane. When this roof was constructed the angle of the pitch is too low for roof tiles as the rain water cannot run off properly in the wind and gets blown under the tiles which can be seen in these photos when the tiles have been stripped off
Strip and re-cover of pitched roof using new eaves guards, Roofshield vapour permeable breathable membrane pitched roof underlay, tanalised lath battens, concrete roof tiles, dry verge covers system and concrete ridge tiles mechanically secured using dry ridge fixing system
Strip and re-cover of concrete tiled pitch roof using new eaves guards, vapour permeable breathable membrane pitched roof underlay and tanalised lath battens
Re-pointing the failed mortar on the chimney stack and installation of new TwinPlas black UPVC guttering